NOM-036 risk assessment: how to run it on a stacking line and what each risk level requires
It takes three steps: identify every task with manual handling, score it with the color-and-points method in Appendices I and II, and move to a specific evaluation if that result falls short. It ends in a report signed by someone with a professional license number, and it has been mandatory since March 31, 2024.
- Topic
- Standards and safety
- Reviewed
- November 20, 2026
- Reading time
- 7 minutes
The risk assessment in NOM-036-1-STPS-2018, Mexico's federal standard on manual handling, has been mandatory since March 31, 2024 (amendment published in the DOF on September 23, 2022). It lists every manual handling task, scores it from 0 to 32 points with Appendices I and II and sets the action: 13 to 20 points, quick action through an ergonomics program; 21 to 32, stop the task. Target Robotics applies it to a stacking line.
In this article
- What the NOM-036 risk assessment requires
- When did it become mandatory?
- Which tasks on a stacking line are in scope?
- How is each task scored, and what does each level require?
- Who signs the report, and which records do you keep?
- What changes in the assessment when you automate stacking
- What does it cost to go without the assessment?
Full name and professional license number. That is how item 7.4 of NOM-036-1-STPS-2018 identifies the person who signs the NOM-036 risk assessment. The same report carries the workplace’s details, the tasks analyzed, the result, the conclusions and the recommendations.
On a stacking line, that document separates the tasks that can stay as they are from the ones that call for an ergonomics program or a stop. Here is the full method applied to stacking: which tasks are in scope, how they get scored, which records you keep and what changes when a robot takes over the load.
What the NOM-036 risk assessment requires
Chapter 7 of the standard (DOF, November 23, 2018) sets it out in three steps:
| Step | Item | What gets done | What goes in writing |
|---|---|---|---|
| 1. Identify | 7.1 a) and 7.2 | List every task with manual handling | Position, description, exposed workers, frequency and duration |
| 2. Estimate | 7.1 b) and 7.3 | Score with colors and points: Appendix I for lifting, lowering and carrying; Appendix II for pushing, pulling or dragging | Points per factor and risk level |
| 3. Evaluate in depth | 7.1 c) | Specific evaluation when the estimate falls short or when the hazard remains after corrections | Method used and result |
The standard allows going straight to the third step: workplaces may apply a specific evaluation directly (7.1). For that evaluation, definition 4.9 names the NIOSH lifting equation and ISO 11228-2:2007, among other scientifically validated methods.
The report stays available to the people who do the lifting (7.5) and becomes part of the occupational safety and health diagnosis required by NOM-030-STPS-2009 (7.7). The NOM-036 risk assessment goes task by task, and every movement on the line gets its own score.
When did it become mandatory?
NOM-036-1-STPS-2018 took effect on January 2, 2020. Chapter 7, along with Table 1 of maximum weights and items 5.1, 8.4 and 8.5, carried a date of January 4, 2023 in the original text.
An amendment published in the DOF on September 23, 2022 moved that date to March 31, 2024. Since that day, the assessment has been mandatory.
Which tasks on a stacking line are in scope?
Every task that moves a load with a person’s strength. On a line that ends at a pallet, five usually show up:
| Task | Appendix | What gets scored |
|---|---|---|
| Taking the case or bag off the conveyor and placing it on the pallet | I, lifting and lowering (AI.2) | Weight and frequency, horizontal distance, lifting height, twisting, posture, grip, floor and environment |
| Carrying the piece a few steps to the pallet | I, carrying (AI.3) | All of the above, plus distance carried, asymmetric load and obstacles |
| Two people carrying a heavy bag together | I, team handling (AI.4) | Weight and number of people, and their coordination |
| Moving the full pallet with a pallet jack | II, with auxiliary equipment (AII.5) | Equipment type and weight, posture, distance, condition of the equipment and the floor |
| Dragging empty pallets or slip sheets | II, without auxiliary equipment (AII.3) | Whether the load rolls, pivots or slides; posture, grip, distance and floor |
The pallet jack has a rule of its own. If the load exceeds the equipment’s rated capacity, the task is scored «Unacceptable» (Appendix II, AII.5). Weigh the full pallet before you score the pallet jack.
Bags also come pre-scored: the standard places non-rigid sacks, such as sand or cement bags, in the poor-grip column. A full worked example, with a 25 kg bag, is in how to stack 25 kg bags.
How is each task scored, and what does each level require?
Each factor gets a color and a point value from the appendix’s tables and charts. The total gives the risk level:
| Points | Level | What the standard requires |
|---|---|---|
| 0 to 4 | Low, acceptable | Follow up on the most vulnerable groups |
| 5 to 12 | Medium, possible | Examine the task in more detail or apply measures through an ergonomics program |
| 13 to 20 | High, significant | Quick action through the ergonomics program |
| 21 to 32 | Very high, unacceptable | Stop the activity and apply measures through the ergonomics program |
Source: NOM-036-1-STPS-2018, Appendix I (AI.5) and Appendix II (AII.4 and AII.6). According to the standard’s own notes, Appendix I is based on the MAC tool from the UK’s HSE, published in 2003, and Appendix II on its RAPP tool.
The ergonomics program (8.5) lists the positions, the technical or administrative measures, the dates, progress tracking, a person in charge and a follow-up evaluation. Execution dates are capped at one year. A high-scoring task gets handled with a date and a named owner in writing.
Measures can be administrative, such as rotating positions or scheduling breaks (8.6), or technical, such as changing procedures or replacing machinery and equipment (8.7). For loads above the limits, the standard accepts auxiliary equipment, such as hand trucks, dollies and pallet jacks, or machinery (8.3).
Who signs the report, and which records do you keep?
From the person who prepares the report, item 7.4 requires full name and professional license number. When there is a specific evaluation, it adds information on the documents that back up that person’s training.
Around the assessment sit more records, each on its own clock:
| Record | Item | How long you keep it or when it expires |
|---|---|---|
| Risk assessment report | 7.4 and 7.6 | Reviewed when the task changes or when a health effect is detected |
| Ergonomics program | 8.5 | Execution dates of up to one year |
| Clinical file | 9.4 | At least five years |
| Training record | 10.3 and 10.4 | Refresher at least every two years |
| Documentary evidence | 12.5 | At least one year |
| Verification unit report, if you hire one | 11.4 | Two years, as long as conditions do not change |
Health surveillance is carried out by a physician with knowledge of occupational medicine (9.3). To detect symptoms, the standard offers the Kuorinka Nordic Questionnaire (9.2, subsection b, and Reference Guide II).
Manual handling training combines theory, practice and an assessment (10.1). It covers health effects, risk factors, the content of the standard and the safe way to work. It takes place before the person starts lifting (10.2).
The record carries name and position, date, topics and instructor, with the instructor’s registration number as an external training agent with the STPS, Mexico’s labor ministry, where applicable (10.4).
What changes in the assessment when you automate stacking
Item 7.6 requires reviewing the assessment when the conditions of a task change. A robotic palletizer changes them: lifting from conveyor to pallet moves to the machine, and other tasks remain on the line that need to be scored.
- Removing the full pallet. With a pallet jack, it falls under Appendix II with auxiliary equipment, at the weight of the complete pallet.
- Restocking empty pallets and slip sheets. Scored according to whether they are lifted, dragged or brought in with equipment.
- Entering the cell to clear a jam. That risk belongs to the machine and goes in the assessment required by NOM-004-STPS-1999, with its own document. The details are in palletizing cell safety requirements.
Replacing machinery and equipment is on the standard’s list of technical measures (8.7, subsection b). Once the robot is installed, the assessment gets run again with the tasks that remain on the line.
To compare manual stacking against a cell with your plant’s numbers, use the manual vs robotic palletizing comparison. Weight limits by age and gender are on the NOM-036 manual handling page.
What does it cost to go without the assessment?
Mexico’s Federal Labor Law fines an employer that fails to observe safety and hygiene standards 250 to 5,000 UMA (Article 994, section V, in the current text with last amendment on May 14, 2026). The UMA is the reference unit Mexico uses for fines.
With the 2026 UMA, at MXN 117.31 a day (DOF, January 9, 2026), the fine runs from MXN 29,327.50 to MXN 586,550. That is a Target Robotics calculation with those two figures.
Article 992 adds two rules. If the violation affects several workers, the fine is imposed for each one. On a repeat violation, the fine doubles. With four people on a task that has no assessment, the top of the fine counts four times.
This is informational text based on the published law and standard; your legal advisor reviews your case.
To start the assessment of a stacking line you need five data points per task: piece weight, pieces per minute, height of the pick and of the lowest layer, distance carried and hours per shift. The same data sizes a bag palletizer robot or a case palletizer.
Frequently asked questions
Who can carry out the NOM-036 risk assessment?
How often does the assessment have to be updated?
What happens if a task scores very high?
Does NOM-036 require the Nordic Questionnaire?
How large is the fine for not complying with NOM-036?
Sources
- NOM-036-1-STPS-2018, manual handling, DOF, November 23, 2018 (in Spanish)
- Amendment to the Second transitory article of NOM-036-1-STPS-2018, DOF, September 23, 2022 (in Spanish)
- Federal Labor Law, current text with last amendment on May 14, 2026, Chamber of Deputies (in Spanish)
- INEGI, 2026 value of the Unit of Measure and Update (UMA), DOF, January 9, 2026 (in Spanish)